|
EVH Wolfgang help
Hi guys! New here obviously, but I have stopped in here from time to time. Here's my problem. I have a EVH Wolfgang and I have been trying to get the neck and action set up properly and have been having a rough go at it. I know a fair amount about the process (as I have been playing and recording for 15 years) but I know the set up could be better. When I adjust the truss rod (as shown on this board) the low e string is just about perfect for 2 business cards and holds them without having to raise the strings much if at all. But on the high e the cards have no clearance! This creates a buzz at the 3rd fret on the high e string. I have tried to loosen the neck and tweek it (very carefully!) but it made almost no difference. I tried raising the high e under the nut, which didnt stop the buzz. This makes me think I have back bow, even though the cards and my eyeballing of the guitar would say otherwise. I can get the truss rod adjusted pretty well, but to work with both sides it makes the action higher then I would like. I play instrumental/shred so I need better action then this! I have the bridge (floyd rose) as low as I can set it up without the bridge popping out and the action is still too high. Ideas? HELP!??!?! Thanks in advance!
|
