Man, I really hate that tailstop/bridge system; it REALLY restricts what one can do to make adjustments.
Either the nut is cut too deep or that end of the tailstop/bridge unit is a smidge too low. I'd back the tension off the strings, back that height adjustment screw up just a hair, and tune her back up. If it still buzzes then I'd do it again. If you keep doing it and by the time the buzz stops your action is too high then it's the nut.
To take a stab at adjusting the nut yourself, remove the string, aquire the smallest amount of Super Glue you can on the end of a toothpick and carefully work the Super Glue into the nut slot attempting to just raise the bottom surface of it a tad. Let it dry thoroughly then string her up and see what you have. If too much glue was applied you can file it down, carefully, to the right height.
The other question is, does the buzz translate through the amp? If not, I wouldn't touch a thing. All my electrics buzz because I crave the lowest action possible but the buzz doesn't come through the amp.
|