Quote:
|
Originally Posted by busaclub
then if I change to line in and change the audio input in mixer screen to ASIO4all v2 selected its very distorted jumpy like its intermittent but you can hear it through speakers muffled
|
Hey busaclub,
I don't know if this will help with that issue, but I like to disable all other devices that are not in use. Since you have ASIO4ALL you should disable all of the MME devices (you won't need them). Follow the instructions
here and after that all you will have left is the ASIO devices. If you still have this distortion problem, then you may want to re-install ASIO4ALL again. Also, have you tried rebooting your computer? Sometimes that can fix random issues.
Have you checked the volume going into your soundcard and made sure you're not driving the input to hard (that could cause distortion). And have you checked out
this lesson to make sure the volume is set correctly on your soundcard? Without being there in person it's hard to tell what exactly is causing the problem, so I'm trying to eliminate all possible sources.
If this is a driver issue, then you could post on the the
ASIO4ALL forum and see if someone there can help get you sorted out.
Quote:
|
In mixer and waver I can choose between Kristal waver, Kristal input, or no input
|
Are you trying to record with Kristal or use effects plugins live in Kristal (like a guitar processor)? The Kristal Waver input is used for recording and the Kristal Input is used for live monitoring.
-tkr