It sounds like background white noise static type stuff. Your not getting a good signal into audacity.
Which fender acoustic? Does it have a volume knob and if so is it turned up most of the way? It almost sounds like you used a microphone?
Which input are you using on the mixer? Since you probably need a preamp for the acoustic I imagine your plugging into Mic 1 line in. I wonder what effect adjusting the trim knob would have on the recording. The outside ring is for mics and the inside ring is for 1/4 line level. You wanna adjust that so it's loud but not clipping (the peak light should just start blinking). ALso i would turn down all other inputs and outputs on the mixer except the Main Mix Level which should be almost loud enough to reach the clip led.
The mixer must plug into your soundcard on the computer which has its own mixer software (if not and probably as well need to check windows ((you use windows?)) volume controls) and make sure the line in or recording levels are appropriate.
Does the sound appear in Audcaity as well as in the mp3?
|